方井模具结构方面,主要是以生产预制混凝土检查井为主,模具的材质一般分为钣金钢模具成型,生产原理是将混凝土倒入塑料模具或铁模具内,等水泥凝固后在拆模或者脱模即可成型,由于检查井钢模具是焊接而成,可能会出现漏浆,所以一般情况下会选用半干料混凝土,避免这一现象.一种高质量的检查井模具必须是耐用的。

In terms of the structure of the square well mold, it is mainly used to produce precast concrete inspection wells. The material of the mold is generally divided into sheet metal steel mold forming. The production principle is to pour the concrete into a plastic mold or an iron mold, and then remove the mold after the cement solidifies. Or it can be formed by demoulding. Since the inspection well steel mold is welded, there may be leakage of slurry, so in general, semi-dry concrete is used to avoid this phenomenon. A high-quality inspection well mold must be durable of.

这种模具用于生产,如果模具本身不耐用,经常出现问题,需要频繁的维修和保养,甚至更换,这无疑对生产者来说是非常不利的。这样的模具的寿命的很短的,也会影响到持续生产。衡量方井模具好坏还应该从生产出来的的好坏来衡量。

This kind of mold is used for production. If the mold itself is not durable, there are often problems, and it needs frequent repairs and maintenance, or even replacement, which is undoubtedly very unfavorable to the producer. The life of such a mold is very short, which will also affect the continuous production. To measure the quality of square well molds should also be measured from the quality of production.